Industrial Lubricants

Lubricants

Cnergyico’s products and services are made to enhance your business, regardless of your industry or how specialized
your equipment is.Find out how using the proper lubricant can help you save a lot of money by extending the
life of your vehicle, increasing equipment efficiency, and minimizing downtime.

ORA (Anti Wear Hydraulic Oil)

Cnergyico ORA range of lubricants is a premium performance, anti-wear hydraulic fluid designed for use in mobile and stationary high pressure industrial & agrifarm hydraulic systems. They resist breakdown under heat or operational stress and help prevent formation of deposits that decrease efficiency of hydraulic power systems.

Performance Standard:

Denison Hydraulics HF-0. HF-1, HF-2 (ISO 32, 46 & 68)
Eaton Vickers M-2952-S, I-286-S (Industrial applications), M-2950-S [mobile applications] (ISO 32, 46, 68)
Cincinnati Milacron P-68 (ISO 32), P-69 (ISO 68), P-70 (ISO 46) • ISO 11158 (HM fluids)
ASTM 6158-05 (HM fluids)
DIN 51524

Benefits

Longer Equipment Life
Special anti-wear additive property reduces wear by protecting surfaces when excessive load causes break down of the lubrication film.

Reduce Maintenance Cost

Effective rust and oxidation inhibitor prevents the production of abrasive particles from rust formation and deposits, that can damage equipment surfaces and seals, and block filters prematurely.

Fluid Compatibility
Good hydrolytic stability and water separation characteristics provide excellent filterability in the presence of water contamination. Good anti-foam and air release properties ensure smooth operation and system efficiency.

Additional benefits associated with ORA range are as below:

Superior Filterability
Low Friction
Hydrolytic Stability

Application

Industrial hydraulic systems.
Hydraulics of moving/stationary and construction equipment.
Hydraulic systems with vane, gear or piston pumps.
Plastic injection molding machine.
Marine hydraulic systems.

Key Properties

Properties/Units	Values				Test Method
ISO VG Grades	32	46	68	100	–
Air Release@50°C, mins	4	7	13	21	ASTM D-3427
Flash Point COC°C	210	220	226	240	ASTM D-92
Pour Point°C	-21	-21	-21	-21	ASTM D-97
Viscosity	–	–	–	–	–
mm²/s@40°C	32	46	68	100	ASTM D-445
mm²/s@100°C	5.35	6.7	8.7	11.3	ASTM D-445
Viscosity Index	99	98	99	99	ASTM D-2270

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

OGER EP (Industrial Gear Oil)

Cnergyico Oger EP is a high performance industrial gear lubricants that are formulated with sulfur-phosphorus additives, which includes rust and oxidation inhibitors. The product is designed primarily for industrial gears where loads and shock bearing capacities and impacts are high.

Performance Standard:

ANSI/AGMA9005-D94 [EP] (Grades 68 to 320)
U.S. Steel 224 (Grade 68 to 320)
David Brown, Table E, approved (Grade 68 to 460)
DIN 51517 Part 3 (Grade 68 to 460)

Benefits

Cnergyico Oger EP Gear Oils helps to improve system efficiency by:

Protecting against impact of oil ageing and contamination for efficient lubricants.
High thermal stability and extreme load pressure.
Helps maintain clean gear and bearing surface, minimizing deposits that interfere with effective lubrication.
Reduces energy loss and improves oil drain intervals.
Protecting gears from wear and corrosion is important to prolong asset life and prevent breakdowns.
Oger range of industrial oils offer protection on a wide range of applications that includes extreme pressure rolling contacts in spur
gears to sliding contact in worm gears.
Good water separation and effective rust inhibitors protect surfaces against rust and corrosion.
High thermal stability additives reduces the formation of pitting and corrosion to ball bearing.

Long Oil Life

Longer oil life helps reduce fluids maintenance of your equipments to ensure operation without interruption.
Oger EP range of lubricants enable you to match oil life to your operational needs.

Application

Enclosed industrial spur & bevel gear applications from standard to high load and extended duty applications.
Used in spur, bevel, helical, worm and industrial hypoid gear cases where extra shock-load protection is needed or particulate contamination occurs.
Suitable for use in reduction gear boxes in mining equipment, cement mills, ball and rolling mills, crushers, conveyors, kilns, winches, machine tools and marine equipment.
Chain drives, sprockets and flexible couplings.

Key Properties

Properties/Units	Values							Test Method
ISO VG Grades	68	100	150	220	320	460	680	–
Viscosity@ 40°C mm²/s	68	100	150	220	320	460	680	ASTM D-445
Viscosity@100°C mm²/s	8.8	11.5	15.1	19.80	25.2	31.97	40	ASTM D-445
Viscosity Index	100	102	101	103	101	101	98	ASTM D-2270
Flash Point	235	235	262	234	248	265	265	ASTM D-92
Pour Point°C	-18	-18	-15	-15	-12	-12	-9	ASTM D-97
Timken OK Load, kg	60	60	60	60	70	70	70	ASTM D-2509

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

OGER EP (Sugar Mill Oil 3800)

Cnergyico Oger EP Sugar Mill Oil 3800 is a black, adhesive, residual oil based lubricant recommended for a range of industrial applications where low cost, heavy lubricating oil is required.

Performance Standard:

ANSI/AGMA 9005-D9

Benefits

Cnergyico Oger EP Gear Oils helps to improve system efficiency by:

Excellent Wear Protection Under Adverse Conditions:
The high load carrying capacity and adhesive properties of the residual base oil ensures that a tough, durable lubricating film is maintained on exposed gears and surface.
Good Rust Protection:
The tenacious lubricant coating protects exposed metal surfaces against the elements. The special compounding components provide
additional rust protection by resisting water washout.
Quiet Operation of Gears:
The highly cohesive lubricant coating remains pliable and effectively cushions gears and contacting surfaces.

Application

Open gears in sugar mills, mining, quarrying and construction equipment.
Chains and sprockets.
Wire rope.
Flexible couplings.
Sliding surface (e.g. drag lines and shovels).
Enclosed gears and traction motor gear cases (where leakage is excessive with conventional lubricants).

Key Properties

Test Description	3800	Test Method
Flash Point, °C	234	ASTM D-92
Pour Point, °C	-12	ASTM D-97
Viscosity, Kinematic mm²/s @100°C	110	ASTM D-445

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

OTX (Industrial Heat Transfer Oil)

Cnergyico OTX Heat Transfer Oils are based on solvent refined, high viscosity index mineral oils to provide superior performance in indirect closed fluid heat transfer systems operating at bulk temperatures upto 320°C.

Performance Standard:

High heat transfer co-efficients
High thermal & oxidation stability
Good viscosity & temperature characteristic
Low vapor pressure & toxicity
Non-corrosive

Oil Life

Life of Cnergyico OTX depends on design and usage of system. If system is well designed and not subjected to abnormal work loads/shutdown the life of the oil can be enjoyed for long period. However, oil condition monitoring at regular interval is important to measure the change in physical characteristics of the oil.

Benefits

Thermal Stability:

Mineral oil are subject to degradation at high temperature.
Cracking of hydrocarbon molecules by heat some of that appears as volatile gases and polymerize into non-soluble deposits.
Oxidation of hydrocarbon oil with atmospheric oxygen that increases rapidly with increasing temperature.
Oxidation produces acidity in oil with some non-soluble contaminants that result in increase in viscosity.

Cnergyico OTX is developed to display exceptionally good thermal stability at temperatures upto 320°C depending on the ISO VG Grades. The low rate of cracking and oxidation gives maximum oil life assuming efficient fluid heater with good pump circulation.

Equipment Design and Operating Advice:

The potential source of damage to Cnergyico OTX is the heater. To avoid damage, circulation pump should be capable of producing high turbulent oil flow through the heater. Heat flux should be kept to a minimum to reduce film temperature.

Application

Mineral Oil for all closed fluid heat transfer systems.

Key Properties

ISO VG Grade	22	32	46	Test Method
Auto ignition Temperature, °C	330	350	360	–
Flash Point, COC, °C	209	230	235	ASTM D-92
Pour Point, °C	-12	-12	-9	ASTM D-97
Viscosity, mm²/s@ 40°C	22	32	46	ASTM D-445
Viscosity Index	102	102	98	ASTM D-2270
Maximum Bulk Film Temp, °C.	290	320	325	–
Coefficient of Thermal Expansion per °C	0.000076	0.00077	0.00078	–

Physical & Thermal Properties of ISO VG 32 versus Temperature
	100°C	200°C	300°C	–
Density, kg/L	0.82	0.76	0.69	–
Dynamic Viscosity, mPa.s	4.35	1.05	0.46	–
Specific Heat Kj / kg.°Cs	2.15	2.15	2.88	–
Thermal Conductivity, W/m.°C	0.128	0.120	0.112	–
Vapor Pressure, mmHg	–	3.5	150	–

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CIRKEL (Industrial Circulating Oil)

Cnergyico Cirkel Circulating Oils are premium quality, refined paraffinic mineral oils chosen for their ability to provide superior lubrication in a wide range of industrial applications. It can be used for general purpose lubrication and mild load application.

Benefits

Good Oxidation and Thermal Stability
Offers strong resistance to the formation of sludge and harmful products of oxidation-long oil and equipment life.
Water Separating Properties
Cnergyico Cirkel Oils offer excellent water shedding properties. Water contents if any can be drained easily from lubrication system, thereby reducing fatigue of gear and bearing interfaces and prevents promotions of ferrous corrosion on all internal surfaces.
Long Oil Service Life
Natural oxidation stability resists oil degradation and protects against oil thickening. Minimal change of oil viscosity over operating temperature range.

Application

Suitable for plain & roller bearings.
Enclosed spur, helical, bevel and worm gear boxes that require non-additive mineral oils applications approved by gear manufacturer.
Industrial circulating systems, particularly those incorporating clay filters to remove high levels of contamination.
Process or extender oils used in rubber & plastic industries.
Used in industrial application where load bearing and temperature range are moderate.

Key Properties

ISO Grade	32	46	68	100	150	220	320	Test Method
Viscosity, Kinematic	–	–	–	–	–	–	–	–
mm2/s @ 40°C	32	46	68	100	150	220	320	ASTM D-445
mm2/s @100°C	5.4	6.8	8.5	11.1	14.5	19.2	23.9	ASTM D-445
Viscosity Index	100	100	95	95	95	98	95	ASTM D-2270
Flash Point	210	220	230	238	244	250	280	ASTM D-92
Pour Point°C	-12	-9	-9	-9	-9	-9	-9	ASTM D-97

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CISPIN (Industrial Spindle Oil)

Cnergyico Cispin is premium quality lubricating oil formulated for use in high speed, mild load bearings in textile spinning units and automated machines. Highly refined cispin oil provides excellent oxidation stability, resistance to deposit formation and rust protection that increases equipment life and ensures smooth operation.

Performance Standard:

Cincinnati lamb P-45 (ISO VG-22)
Cincinnati lamb P-62 (ISO VG-5, 10)

Compatibility

Paint compatibility.
Cnergyico Cispin Oils are compatible with seal materials and paints normally specified for use with mineral oils.

Benefits

Non-corrosiveness to metals.
Excellent anti-wear protection.
Excellent water separation properties.
Superior protection from rust and oxidation.
Excellent oxidation stability.
Cnergyico Cispin Oils are designed to meet specification requiring low viscosity oil with high-quality base oil, for application running at high speed such as those found in speed frames and automated machine tools.

Application

In textile industries where machine oil does not have contact with the fabric or where oil staining is not an issue.
Lubrication of high speed spindle and machine spindle bearings.

Key Properties

ISO VG Grade	10	22	Test Method
Appearance	Bright & Clear Yellow Liquid	Bright & Clear Yellow Liquid	–
Viscosity @ 40°C mm²/s	10	22	ASTM D-445
Viscosity @ 100°C mm²/s	2.3	4.2	ASTM D-445
Copper Corrosion	1a	1a	ASTM D-130
Rust Test	Pass	Pass	ASTM D-665B
Emulsion Test, Minutes	5	5	ASTM D-1401
Acid Number mg KOH/g	0.2	0.2	ASTM D-974
ASTM Color	1	1.5	ASTM D-1500
Flash Point COC°C	170	210	ASTM D-93
Pour Point°C	-12	-12	ASTM D-97

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

ODE GL-4 (Extreme Pressure Automotive Gear Oil)

Cnergyico ODE GL-4 is a high quality oil for manual transmission and gear lubricant containing multi-functional additives required for mild extreme pressure conditions and requirements.

Performance Standard:

API service classification GL-4

Benefits

Long Life Low Maintenance
Selected highly refined base oil and special inhibitor system provide good oxidation stability to resist oil degradation and shrinking of oil.
Low Maintenance Cost
Special mild-EP additive and corrosion inhibitor system is non-corrosive toward sensitive copper alloy components and protect ferrous metal against rusting in presence of moisture. Good thermal stability keeps gear cases and bearing clean and free from harmful deposits.

Note: The typical characteristicsNot suitable for heavy duty hypoid axles.

Application

All industrial application, automotive, agricultural gear sets, lubrication of track rollers of crawler tractor for which API GL-4 oil acceptable/performance level required.
It provides excellent lubrication of manual gearboxes of motorcycle, passenger cars and commercial vehicles operation under high-speed low torque and low-speed high torque condition.
Suitable for rear axles application presenting condition of medium severity, such as light-duty commercial vehicle passenger cars and motorcycle.

Key Properties

Properties	GL- 4	GL- 4	Test Method
SAE Grade	90	140	–
Viscosity
@40ºC mm2/s	185	358	ASTM D-445
@100ºC mm2/s	17.3	27	ASTM D-445
Viscosity Index	100	101	ASTM D-2270
Pour PointºC	-15	-12	ASTM D-97
Flash Pint (COC)ºC	185	200	ASTM D-92

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

ODE GL-5 (Automotive Hypoid Differential Oil)

Cnergyico ODE GL-5 axle oil is blended for wide range lubrication of automotive containing EP additives required for extreme pressure/heavy-duty conditions.

Performance Standard:

API service classification GL-5

Benefits

Prolong Oil & Equipment Life
Specially selected additives provide good anti-wear, anti-rust and special inhibitor system provide good oxidation stability to resist oil degradation and thinking of oil under severe operating conditions. High performance sulfur-phosphorus EP additive system provides excellent load carrying capacity to protect gear equipment. Resistance to corrosion alloys and ferrous metals.
Low Maintenance Cost
Special dispersant and additive package suspends sludge and carbonaceous deposits in the gear oil, preventing their deposit on gear components and oil seals, thus avoiding the premature oil change overhaul service cost. Excellent thermal stability minimizes the total amount of harmful deposits.

Application

All industrial application, automotive hypoid gear differentials operating under high-speed/shock load, high-speed low torque and low-speed high torque conditions where API GL-5 is recommended.
It provides excellent lubrication heavy duty non-synchronized manual transmission where API GL-5 performance required.
Suitable for hypoid gear axles, motorcycle gear units separated from the engine.
Automotive transmission, differential.
Moderate to heavily loaded gear sets in stationary and moving equipment.

Key Properties

Properties	GL- 5	GL- 5	Test Method
SAE Grade	90	140	–
Viscosity
@40ºC mm2/s	185	355	ASTM D-445
@100ºC mm2/s	17	27	ASTM D-445
Viscosity Index	100	101	ASTM D-2270
Pour PointºC	-15	-12	ASTM D-97
Flash Pint (COC)ºC	180	200	ASTM D-92

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

SOCOL (Soluble Cutting Oil)

Cnergyico Socol Soluble Cutting Oil is general purpose soluble oil for moderate machining application on a wide range of materials.

Recommended Dosage

The concentration of Socol metal working fluid varies on the type of machining operations required, water hardness and the level of protection required against rust protection. Socol is usually used in an oil-to-water ratio of 1:10 to 1:60 or as per the application required. In general, a richer emulsion is used for the more difficult jobs, the intermediate for the free-machining metals and the lean mixtures are used for operations where massive cooling is required, like in grinding.

Benefits

Emulsion stability – Readily emulsifies to form a stable emulsion in wide range of water hardness.
Corrosion protection – This is guaranteed both for machine tool and metal piece.
High Lubricity – High mineral oil content of emulsion provides excellent tool lubrication and finish to machining piece.
Non-ferrous – Suitable for use with non-ferrous metals.

Features

High quality oil
Reduces heat
Improves tool life
Gives a better surface finish
Stable and long lasting emulsion
Stable in use and in storage

Storage Instruction

To be stored in temperatures 5°C to 40°C for not over 10 to 12 months & to be protected from freezing.

Application

Cnergyico Socol is a water soluble oil with highly refined mineral oil contents suitable for wide range of machining activities on low to medium alloy steels, aluminum, copper and copper alloys and brass. Ideally suited for machine workshops that work with mixed metal grades.
Suitable for engineering workshops with high machining activities on different grades of metals.

Key Properties

Properties	Unit	Value	Test Method
Specific Gravity @15°C	g/cm3	0.875	ASTM D-1298
Kinematic Viscosity @40°C	mm2/sec	29.55	ASTM D-445
Kinematic Viscosity @100°C	mm2/sec	5.38	ASTM D-445
Viscosity Index	–	116	ASTM D-2270
pH of 5 vol %, in water	–	11.1	ASTM E-70
Refractometer Factor	–	1	–
Density @20°C Kg/m³	–	880-890	–
Mineral Oil Content	–	80%	–

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CENSURA-T (Turbine Oil)

Cnergyico Censura-T series is formulated from high quality base oil and a combination of Zinc free oils. It is formulated from premium quality, chemically stable, high VI base stocks that are further enhanced by the addition of oxidation inhibitors. These inhibitors provide resistance to thermal degradation over long period of time, protection against rust and corrosion, low foaming and good demulsibility, permitting water and other contaminants to readily separate from the oil in the system reservoir.

Benefits

Cnergyico Turbine Oils Censura-T delivers value through:

Long lubricant life
Provided by excellent thermal and oxidation stability.
Excellent demulsibility
Helps ensure good lubricant film strength and minimal wear through quick water separation.
Excellent air release
In turbine oil reservoir systems by the foam inhibitor hastening the release of foam and entrained air.
Rust protection
Rust protection of metal surfaces due to the use of an effective rust and corrosion inhibitor.
Environmental benefits
All grades are ash-less. This facilitates reclaiming and recycling.

Application

Cnergyico Censura-T series oils are available in ISO VG grades 32, 46, 68 & 100. They are suitable for use in water lubrication and non-geared industrial steam turbines, bearing lubrication and cooling that require mineral turbine oils. In addition, Byco Turbine Oils Censura-T promotes outstanding performance in hydraulic systems, gear cases, bearing and other industrial components.

Key Properties

Properties	Unit	Value				Test Method
ISO VG Grade	–	32	46	68	100	–
Viscosity @40ºC	mm2/s	32	46	68	100	ASTM D-445
@100ºC	mm2/s	5.4	6.9	8.8	11.3	ASTM D-445
Viscosity Index	–	103	102	102	99	ASTM D-2270
Flash Point, COC	ºC	220	240	247	265	ASTM D-92
Pour Point	ºC	-9	-6	-12	-9	ASTM D-97
Zinc (max)	ppm	10	10	10	10	ASTM D-4951
Acid Number	mg KOH/g	0.09	0.09	0.09	0.09	ASTM D-974
Oxidation Stability Hrs To 2.0 Acid number (min)	–	2800	2500	2000	–	ASTM D-943

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

COMPRESS-S (Screw Type Compressor Oil)

Cnergyico Compress-S is a hydro-treated premium tier compressor oil for rotary sliding vane and screw air compressors. It is developed on a blend of selected solvent refined base oils and selective additives. The modern day design of rotary screw and vane compressors provide high delivery pressures under severe work conditions. Byco Compress-S oil has been specially designed for use in modern type of compressors where our lubricant demonstrates considerable performance improvement that is in the area of compressor cleanliness and wear protection.

Performance Standard

Very good oil oxidation resistance
Resists formation of carbon deposits in sliding vane slots, enabling them to move freely. Also resists deposit formation on rotating components of screw compressors. As a consequence, high levels of compressor efficiency can be maintained for long period in both types of compressors.
Very good air release and anti-foam properties
The careful selection of base oils and additives provide rapid air release without excessive foaming to give trouble-free operation even under cycling conditions.
Very good rusting and wear protection
Effectively protects all metal surfaces from corrosion. Protects all sensitive machinery parts, e.g. gears, screws, bearings from wear and prolongs the service intervals.
Internal cleanliness
Coupled with the oil’s long life capability is its ability to maintain internal surface cleanliness in service. This is important to maintain high levels of performance for the compressors and separator/coalesce.
Improved water shedding properties
Maintain performance when contaminated with water.

Benefits

Good seal compatibility
For increased seal longevity and reduced leakages.
Low temperature performance
For easy start-up at low temperature.
Yellow metal passivation
Corrosion protection and longer component life.
Hydrolytic stability
Prolongs oil life in moist condition.

Application

Rotary sliding vane air compressors
Oil flooded or oil injected, single or two-stage compressors, operating at pressure of up to 10 bar and with air discharge temperatures of up to 100°C.
Screw air compressors
Oil flooded or oil injected, single or two-stage compressors, operating at pressures of up to 20 bar and with air discharge temperatures of up to 100°C.

Key Properties

ISO Viscosity Grade	32	46	68	Test Method
Kinematic Viscosity
mm²/s@40°C	32	46	68	ASTM D-445
mm²/s@100°C	5.4	6.7	9.0	ASTM D-445
Flash Point°C	205	210	215	ASTM D-92
Pour Point°C	-30	-30	-30	ASTM D-97
Sulphated Ash Mass%	< 0.03	< 0.03	< 0.03	ASTM D-874
Water Separability@54°C (minutes)	15	20	20	ASTM D-1401
Density@15°C kg/m³	871	874	876	ASTM D-4052

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

COMPRESS-P (Piston Type Compressor Oil)

Cnergyico Compress-P is a hydro-treated premium tier compress oil, for piston air compressors. It is developed on a blend of selected solvent refined base oils and selective additives. The modern day design of piston compressors provide high delivery pressures under severe work conditions. Byco Compress-P oil has been specially designed for use in modern type of compressors where our lubricant demonstrates considerable performance improvement that is in the area of compressor cleanliness and wear protection.

Performance Standard

Prolonged service intervals
Allows the interval between valve and piston maintenance to be extended. Compressors can be kept in service for much longer periods, operating at a consistently high level of efficiency.
Safe airlines
In discharge airlines, the combination of rust particles dispersed in carbonaceous deposits, coupled with heat from recently compressed air, can cause an exothermic reaction leading to the possibility of fires and explosion. Cnergyico Compress-P helps to minimize the likelihood of this danger arising.
Very good oxidation resistance
Resistance to the formation of carbon deposits and lacquer on valves and piston crowns, caused by the by-products of corrosion, such as ferric oxides and hydroxides, at high working temperature and pressures. Such deposits can cause serious damage, lower compress efficiency and increase maintenance costs.
Very good rusting and wear protection
Effectively protects all metal surfaces from corrosion. Protects all sensitive machinery parts, e.g. housing, valves, bearings, from wear and prolongs the service intervals.
Very good air release and anti-foam properties
The careful choice of additives ensures rapid air release without excessive foaming.
Very good water separation properties
Cnergyico Compress-P separates readily from water allowing excess water to be drained from the oil circulation system, thus preventing accelerated corrosion and a reduction in lubrication efficiency. This also helps separators and drier units.

Benefits

ISO 6743-3A-DAH
Good seal compatibility
Cnergyico Compress-P is compatible with all sealing materials commonly used in air compressors.
Low temperature performance
For easy start-up at low temperature.
Yellow metal passivation
Corrosion protection and longer component life.
Hydrolytic stability
Prolongs oil life in moist condition.

Application

Reciprocating Air Compressors
Industrial reciprocating air compressors operating with air discharge temperatures of up to 220°C.
Breathing Air Compressors
Cnergyico Compress-P may be used in breathing air compressors, provided subsidiary clean-up apparatus is used to ensure that the air produced is fit for breathing.

Key Properties

ISO Viscosity Grade	68	100	150	Test Method
Performance Standard	VDL 68	VDL 100	VDL 100	–
Kinematic Viscosity mm²/s@40°C	68	100	150	ASTM D-445
Kinematic Viscosity mm²/s@100°C	7.8	9.2	12.1	ASTM D-445
Flash Point°C	235	235	240	ASTM D-92
Pour Point°C	-30	-33	-30	ASTM D-97
Acid Number mg/KOH/g	0.3	0.3	0.3	ASTM D-974
Sulphated Ash Mass%	0.06	0.06	0.06	ASTM D-874
Rust Prevention (Steel)	Pass	Pass	Pass	ASTM D-665 B
Water Separability@54°C (minutes)	30	–	–	ASTM D-1401
@82°C (minutes)	–	20	20	ASTM D-1401

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

MP GREASE (Lithium-based Industrial Grease)

Cnergyico MPG is lithium based multi-purpose grease, based on mineral oil and lithium soap thicker, designed for a range of applications. It can be used in automotive, construction, textile industry and electric motor bearing.

Lithium-based Industrial MP Grease

Benefits

Very good mechanical stability
High dropping point
Good water wash-out characteristics
Good rust protection
Provide protection even at high operating temperature

Operating Temperature Range

Cnergyico MPG is recommended for use over the temperature range -10°C to +110°C.

Application

Cnergyico MPG is recommended for general purpose lubrication of plain and rolling bearings operating at moderate load in industry and at other greasing requirements.
It can be used in all points requiring grease in passenger cars, truck, buses, trailers and Agri-tractors. These include wheel bearings, ball joints, all chassis points, universal joints, linkages, dynamo, starter motor’s bearing and steering gear and water pumps.
It also can be used in bearings of power tools, lawn movers and other household equipments.

Key Properties

Properties	Unit	Value	Value	Method
NLGI Consistency	–	2	3	–
Color	–	Amber	Amber	Visual
Soap Type	–	Lithium	Lithium	–
Base Oil Type	–	Mineral	Mineral	–
Texture	–	Smooth	Smooth	–
Penetration Worked	–	–	–	–
60 Strokes	0.1	265-295	220-250	ASTM D-217
10,000 Strokes	MM	<295	<250	ASTM D-217
Work further 60 strokes	–	<295	<250	ASTM D-217
Dropping Point	°C	Min. 170	Min. 170	ASTM D-566
Water Wash Out@100°F	%	4	3	ASTM D-1264
Water Wash Out@175°F	%	7	3	ASTM D-1264
Oil Sepration 18 hrs@40°C	% wt	5	3	IP 121
Leakage Tendency 6 hr@105°C	g	5 max	3 max	ASTM D-1263

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

EP GREASE (Lithium-based Industrial Grease)

Cnergyico EPG is Lithium based extreme pressure (EP) multi-purpose industrial grease, with EP additive. It has a very high resistance to mechanical loads and minimizes wear under heavy load and shock conditions.

Benefits

Very good mechanical stability
High dropping point
Good water wash-out characteristics
Good rust protection & corrosion protection
Provide protection even at high operating temperature

Operating Temperature Range

Cnergyico EPG is recommended for use over the temperature range -10°C to +110°C.

Application

Cnergyico EPG is recommended for lubrication of both plain and rolling element bearings operating at high temperature and moderate or high load conditions.
Cnergyico EPG can be used in most industrial and automotive applications where loaded baring and joints exit.

Key Properties

Byco Grease	–	EPG 2	–
NLGI Consistency	–	2	–
Color	–	Amber	–
Soap Type	–	Lithium	–
Base Oil Type	–	Mineral	–
Texture	–	Smooth	–
Cone Penetration	–	–	–
Unworked@25°C	0.1 MM	265-295	ASTM D-217
Dropping Point	°C	Min. 180	ASTM D-566
Water Wash Out@100°F	%	4	ASTM D-1264
Water Wash Out@175°F	%	7	ASTM D-1264
Oil Sepration 18hrs@40°C	%wt	5 max	IP 121
Leakage Tendency 6 hr@105°C	g	5 max	ASTM D-1263
Kinematic Viscosity@40°C	cSt	85 max	ASTM D-445
Kinematic Viscosity@100°C	cSt	10.5 max	ASTM D-445

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Gas Engine Oil

OCTIVE-XL 40 (Gas Engine Oil)

Cnergyico Gas Engine Oil Octive-XL 40 is supreme gas engine oil, formulated for use in the latest generation of highly-rated gas or dual fuel engines which require ‘low ash’ oil. Octive-XL 40 is specifically designed to guarantee the efficiency of your gas engines, available in SAE 40, is a high quality, low ash gas engine oil developed to meet the requirements of conventional and turbo-charged gas engines with catalyst and heat exchanger.

Performace Standard: API CF

Meets standard equipment requirement

DEUTZ-MWM
MAN Co-Gen MDE
JENBACHER (3/4/6 Series)
WAUKESHA Co-Gen
WARTSILA SACM
CAT 3XX/3300/3400/3500/3600 Series

Benefits

Extended oil change intervals.
Maximum protection against piston scuffing, scoring and cylinder liner wear.
Resistance to oxidation and nitration.
Considerable anti-wear and anti-corrosion properties.
Reduction in formation of deposits.
TBN/Ash content adapted to improve engine cleanliness.
Formulations specifically designed to meet equipment constraints.
Selected base oils and additives to meet all engine manufacturer requirements even in the most aggressive environment.

Application

Cnergyico Octive-XL 40 allows extended oil drain intervals even in case of poor corrosive gas qualities like gases containing sulphur or hydrogen sulphide or even corrosive organic halides. Depending on the gas quality, the oil drain interval can be extended with continuous oil monitoring.

Protect the environment
Take used oil to an authorized collection point.
Do not discharge into drains, soil or water.

Storage precautions
The closed container can be kept in a dry and covered location at temperatures between 20°C and 40°C for maximum of 3 years.
After longer storage the oil should be homogenized.

Oil Analysis
For optimum results regular oil analysis is strongly recommended.

Key Properties

Properties / Units	Units	Value	Test Method
SAE Grade 40	–	–	–
Density@15ºC	kg/m3	886	ASTM D-4052
Viscosity@40ºC	mm2/s	138	ASTM D-445
@100ºC	mm2/s	14.7	ASTM D-445
Viscosity Index	–	106	ASTM D-2270
Flash Point, COC	ºC	250	ASTM D-92
Pour Point	ºC	-18	ASTM D-97
Sulphated Ash % wt.	–	0.43	ASTM D-874
Base Number mg KOH/g	–	5	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

OCTIVE-LA 40 (Gas Engine Oil)

Cnergyico Gas Engine Oil Octive-LA 40 specifically designed to guarantee the efficiency of your gas engines, available in SAE grade 40, is a high-quality, low ash gas engine oil developed to meet the requirements of conventional and turbo charged gas engines with catalyst and heat exchanger.

Performace Standard: API CF

Meets standard equipment requirement

DEUTZ-MWM
MAN Co-Gen MDE
JENBACHER (3/4/6 Series)
WAUKESHA Co-Gen
WARTSILA SACM
CAT 3XX/3300/3400/3500/3600 Series

Benefits

Extended oil change intervals.
Maximum protections against piston scuffing, scoring and cylinder liner wear.
Resistance to oxidation and nitration.
Considerable anti-wear and anti-corrosion properties.
Reduction in the formation of deposits.
TBN/Ash content adapted to improve engine cleanliness.
Formulations specifically designed to meet equipment constraints.
Selected base oils and additives to meet all engine manufacturer requirements even in the most aggressive environments.

Application

Cnergyico Octive-LA 40 allows acceptable oil drain intervals even incase of poor corrosive gas qualities like gases containing sulphur or hydrogen sulphide or even corrosive organic halides. Depending on the gas quality, the oil drain interval can be optimized with continuous oil monitoring.

Protect the environment
Take used oil to an authorized collection point.
Do not discharge into drains, soil or water.

Storage precautions
The closed container can be kept in a dry and covered location at temperatures between 20ºC and 40ºC for maximum of 3 years. After longer storage the oil should be homogenized.

Oil Analysis
For optimum results regular oil analysis is strongly recommended.

Key Properties

Properties	Units	Value	Test Method
SAE Grade 40	–	–	–
Density@15ºC	kg/m3	886	ASTM D-4052
Viscosity@40ºC	mm2/s	163	ASTM D-445
@100ºC	mm2/s	15.6	ASTM D-445
Viscosity Index	–	97	ASTM D-2270
Flash Point COC	ºC	250	ASTM D-92
Pour Point	ºC	-21	ASTM D-97
Sulphated Ash % wt.	–	0.44	ASTM D-874
Base Number mg KOH/g	–	5	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

OCTIVE-MA 40 (Gas Engine Oil)

Cnergyico Octive-MA 40 is a high-quality, medium ash gas engine oil developed to meet the requirements of a wide range of gas engines running on different gas quality. It is also especially designed for bio gas to retain the high TBN’s. These engines are generally of the lean-burn design where increased manifold pressures prevent sufficient lubricant from getting into the valve guide areas. Cnergyico Octive-MA 40 offers outstanding resistance to valve train wear and protection against deposit formation. It is formulated from high-quality mineral base oils and an advanced medium ash additive system designed to provide excellent protection of engine and compressor components. Cnergyico Octive-MA 40 is a premium quality oil blended for use in highly-rated spark ignition and dual-fuel four stroke engines that require a ‘medium ash’ oil, or where “sour gas” is in use.

Performace Standard: API CF

Meets standard equipment requirement

DEUTZ-MWM
MAN Co-Gen MDE
JENBACHER (3/4/6 Series)
WAUKESHA Co-Gen
WARTSILA SACM
CAT 3XX/3300/3400/3500/3600 Series

Benefits

Its high reserve alkalinity and TBN retention also makes it suitable for engines operating on fuels that contain low amounts of corrosive materials such as hydrogen sulphide.
Provides cleaner engines, lower wear rates and improved engine performance.
Outstanding anti-wear and anti-scuff properties.
Innovative medium ash formulation.
Excellent corrosion resistance.
Low phosphorous content ensures exhaust system catalyst compatibility and hence maximum service life.
Very high oxidation & nitration resistance.
Enhanced diesel detergency for dual-fuel engines.
Optimized level of ‘ash’ components.

Application

Cnergyico Octive-MA 40 can be used in engines equipped with catalytic converters and specially for all gas engines operating under severe conditions. It allows acceptable oil drain intervals even in case of poor corrosive gas qualities like gases containing sulphur or hydrogen sulphide or even corrosive organic halides. Depending on the gas quality, the oil drain interval can be optimized with continuous monitoring.

Protect the environment
Take used oil to an authorized collection point.
Do not discharge into drains, soil or water.

Storage precautions
The closed container can be kept in a dry and covered location at temperatures between 20°C and 40°C for maximum of 3 years. After longer storage the oil should be homogenized.

Oil Analysis
For optimum results regular oil analysis is strongly recommended.

Key Properties

Properties	Units	Value	Test Method
SAE Grade 40	–	–	–
Density@15ºC	kg/m3	886	ASTM D-4052
Viscosity@40ºC	mm2/s	165	ASTM D-445
@100ºC	mm2/s	15.88	ASTM D-445
Viscosity Index	–	97	ASTM D-2270
Flash Point COC	ºC	256	ASTM D-92
Pour Point	ºC	-21	ASTM D-97
Sulphated Ash % wt.	–	0.93	ASTM D-874
Base Number mg KOH/g	–	9.5	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Intelu

INTELU SUPREME (API-CI4 Diesel Engine Oil)

Cnergyico Intelu Supreme Multi Grade high performance oil for a variety of diesel engines especially heavily loaded commercial vehicles and construction equipments operating in extreme conditions. Our lubricant contains selected additives designed to provide three layer protection to improve engine and oil performance in three key areas: acid, corrosion and deposit control, reduce engine wear, suitable for heavy-duty turbo and non-turbo charged diesel engine for on and off highway applications.

Performance Standard:

API CI-4 / SL, CF, CF4 CH-4 CG-4
ACEA E7, E5, E3
Global DHD-1
CAT EFC-1 / EFC-2

Meets standard equipment requirement

MB 228.3
Volvo VDS-3
MAN M3275-1
Deutz DQC III
Cummins CES 20078/7/6/5/2
Caterpillar ECF-1-A
MTU Category 2
Renault Truck
Allison C-4

Benefits

Excellent wear protection under high operating stressful conditions.
Protection from corrosion even when used with diesel fuels with high sulphur content.
Sludge and deposits are prevented by under extraordinarily high thermal loads as well as in stop and go driving conditions.
Suitable for modern low emissions fitted with exhaust diesel particulate filters.
Demonstrated protection and performance in latest high power heavy duty diesel engine from European, Chinese, Korean & Japanese manufacturers in both on-highway and off-highway applications.

Application

Cnergyico Intelu Supreme 15W-40 is a significantly high performance diesel engine oil for use in:

Heavy-duty commercial vehicles with EURO II/EURO III engines operating on long hauls.
Passenger cars, trucks & trailers.
Bus and dumper operation.
Construction and mining equipments.

Key Properties

Properties / Units	Values	Test Method
SAE Viscosity Grade	15W-40	–
Kinematic Viscosity @100°C mm²/s	15.5	ASTM D-445
Kinematic Viscosity @40°C mm²/s	115.7	ASTM D-445
Viscosity Index	140	ASTM D-2270
Density @15°C	0.885	ASTM D-4052
Flash Point (COC)°C	233	ASTM D-92
Pour Point°C	– 30	ASTM D-97
Sulphated Ash %wt	1.55	ASTM D-874
Base Number mg KOH/g	10	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

INTELU CLASSIC (API-CH4 Diesel Engine Oil)

Cnergyico Intelu Classic is a high performance, multigrade, heavy-duty diesel engine oil specially designed to lubricate high speed turbo charged diesel engines requiring API CH-4, CF or SJ performance lubricants. Formulated with advance quality base oil in conjunction with superior additive package technology to deliver longer engine life and enhanced performance.

Performance Standard:

API CH-4, CG-4, CF, CD
API SJ
ACEA E3, E5, E7

Meets standard equipment requirement

CC MC D4, D2, G4, MB228.30
Volvo VDS-2, Allison-C-4

Benefits

Reduces Fleet Maintenance Costs
Excellent additive packages including a combination of high performance hydrocracked base fluids provides excellent overall engine cleanliness in all service conditions. Exceptional oxidation stability protects against the formation of gums and varnish at elevated temperatures.
Prolongs Engine Life
High efficiency dispersant combination plus proven metallo anti-wear additive system provides excellent protection against wear critically loaded components under all operating conditions. Multigrade viscosity provides additional protection against wear at start-up and under high temperature operating conditions.
Preserves Full Power and Performance
Outstanding metallic detergent additive system preserve full power and performance by providing excellent upper-ring-belt deposit control under the high temperatures encountered in turbocharged diesel engines.

Application

Mixed fleets of diesel engines (high speed, four-stroke, turbocharged or naturally aspirated).
Commercial road transport.
Off-highway vehicles and plants.
Agricultural tractors and farm machinery.
High speed diesel engines in marine service (e.g., fishing, river transport, etc.).
Generator sets.

Key Properties

SAE Grade	15W-40	Test Methods
Base No.
D2896, mg KOH/g	9.5	ASTM D-2896
D4739, mg KOH/g	9	ASTM D-4739
Sulfated Ash, m%	1.2	ASTM D-874
Viscosity,
mm²/s@40°C	115	ASTM D-445
mm²/s@100°C	15.1	ASTM D-445
Viscosity Index	137	ASTM D-2270
Zinc m%	0.15	–

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

INTELU PREMIUM (API-CF4 Diesel Engine Oil)

Cnergyico Intelu Premium multi grade diesel engine oil is designed with proven combination of additives that cater to the varying needs of your engine. It includes active dispersants to wash away dirt keeping your engine clean. The additives release its effectiveness to ensure reliable and consistent protection against deposits and wear to resist thickening of the oil in high operating temperatures. It is prime quality multi-grade diesel engine oil designed for all types of turbo charged engines operating under high-speed, high load and severe field conditions.

Performance Standard:

API CF4/CF/SJ
ACEA A2, B3,E2

Meets standard equipment requirement

MB 228.1 & Volvo VDS,
ACEA 07-E2
ACEA 04-E2
MAN 271
MACK EO-K/2
CATERPILLAR TO-2
MIL-L-46152E
ACEA 02-E2/B2/A2
VW 501.01/505.00

Benefits

Improves oil consumption.
Enhanced piston cleanliness.
High performance under extreme load and severe terrain conditions.
Protection against deposits and wear in turbo and non-turbo charged engines.

Application

Outstanding Engine Protection
Delivers optimum engine protection, longer oil life and improved fuel economy with exclusive additive technology that reduces wear, soot thickening and corrosion in severe operating environment..
Protection for Turbo & Non-Turbo Charged
Cnergyico Intelu Premium is an ideal choice for a wide range of turbo-charged & non-turbo charged engines under adverse operating conditions. It is recommended for use in modern trucks, buses and agricultural tractors in off highway applications.
Piston Cleanliness
The exclusive additives in our lubricants provide improved piston cleanliness and guaranteeing the user consistent high performance of their engines.

Key Properties

Properties / Units	Values		Test Method
SAE Viscosity Grade	15W-40	20W-50	–
Kinematic Viscosity@100°C mm²/s	15.5	19	ASTM D-445
Kinematic Viscosity@40°C mm²/s	115.7	165	ASTM D- 445
Viscosity Index	130	135	ASTM D- 2270
Dynamic Viscosity@-20°C mPa s	6600	–	ASTM D-5293
Dynamic Viscosity@-15°C mPa s	–	9100	ASTM D-5293
Density@15°C	0.885	0.895	ASTM D-4052
Flash Point (COC)°C	226	236	ASTM D-92
Base Number mg KOH/g	10	10	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

INTELU ENHANCED (API-CF Diesel Engine Oil)

Cnergyico Intelu Enhanced SAE 20W-50 multi-grade diesel engine oil is designed for hot, cold, steep & dusty environmental operations where you are sure that your oil will protect your engine under such operating conditions.

Performance Standard:

API CF/CD/SF

Meets standard equipment requirement

MERCEDES BENZ 227.0
MIL-L-2104 E
MIL-L-46152 B/C
CCMC D2
ACEA E 1-96
CUMMINS
PERKINS
MAN 270
CATERPILLAR TO-2
ALLISON C-4
KOMATSU

Benefits

Energized Protection – Intelu Enhanced heavy duty diesel engine oil works with optimal performance in three key areas.
Acid control – through performance additives that protects your engines against corrosion as fuel burns.
Control against dirt deposits – helps keep engine clean for consistent engine performance, high efficiency and long engine life.
Control against wear – prevents moving engine component surfaces against wear and ensures long engine life.
Protective power for non-Turbo charged engines – provides reliable lubrications for heavy duty, non-turbo charger application under tough and long lasting operating environment.

Operational Benefits

Can be used in diesel engines; normally aspirated or turbo-charged.
Reduces engine wear.
Extends oil change periods.
Keeps engine interior clean.

Due to its unique viscosity characteristic, Intelu Enhanced can reduce oil consumption in old engines thereby lowering operating costs of the equipment.

Applications

Intelu Enhanced is formulated from high quality paraffinic base oils and detergent-dispersant, anti-oxidation, anti-corrosion, anti-wear and anti-foam additives. They are used extensively in diesel engine driving transports, earth-moving/quarrying and construction equipment as well as stationary diesel engines.

Key Properties

Properties / Units	Values	Test Method
SAE Viscosity Grade	20W-50	–
Kinematic Viscosity@100°C mm²/s	19	ASTM D-445
Kinematic Viscosity@40°C mm²/s	165	ASTM D- 445
Viscosity Index	127	ASTM D-2270
Dynamic Viscosity@-15°C mPa s	9050	ASTM D-5293
Density@15°C Kg/m³	0.885	ASTM D-4052
Flash Point (COC)°C	236	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

INTELU GOLD (API-CD Diesel Engine Oil)

Cnergyico Intelu Gold monograde diesel engine oils are used for streamlining of lubricants for vehicle and fleet equipment with less powerful engines. Whether continuously at full throttle or in STOP and GO motion, Intelu Gold protects against wear, dirt deposits and corrosion in different operating conditions with low oil consumption and extended oil change intervals.

Performance Standard:

API CD/SF

Benefits

Contains especially effective additives against wear, deposits and corrosion.
Zero residue in combustion chamber, valves and pistons.
Prevention of seals to ensure longer engine life.

Application

Reliable Diversified Performance
Provide reliable all year round performance in the application of less powerful diesel engines like small trucks, commercial vehicles, vans, tractors and certain stationary units.
Hydraulic & Transmissions
Intelu Gold Monograde Oils can be used in certain transmission and mobile hydraulic systems where use of monograde engine oils is recommended by the equipment manufacturer.

Key Properties

Properties / Units	Values			Test Method
SAE Viscosity Grade	30	40	50	–
Kinematic Viscosity@100°C mm²/s	11.2	14	18.5	ASTM D-445
Kinematic Viscosity@40°C mm²/s	102	143	215	ASTM D-445
Viscosity Index	96	96	96	ASTM D-2270
Density@15°C	0.858	0.884	0.878	ASTM D-4052
Flash Point (COC)°C	252	256	256	ASTM D-92
Pour Point°C	– 18	– 18	– 18	ASTM D-97
Base Number mg KOH/g	5.5	5.5	5.5	ASTM D-2896

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

Marine Engine Oil

CORAL 4050 (TBN-50 Marine Oil)

Cnergyico Coral 4050 marine engine oil is high alkaline reserve trunk piston engine oil (TPEO) designed for use in high specific output medium-speed trunk piston engines burning high sulfur residual fuels (over 3% sulfur) under severe conditions in marine or stationary service.

Performace Standard: API CF

Benefits

Extends Rings and Liner Life
Highly alkaline detergent additive system ensures that acidic by-products from the combustion of high sulfur fuel are effectively neutralized to minimize ring and cylinder liner wear.
Reduces Maintenance Costs
Special combination of highly refined base oils and highly detergent additive system minimizes deposit formation in the ring belt zone to prevent ring sticking. Deposits are also minimized in the combustion chamber and exhaust areas. High viscosity and lubricity maintain an oil film under the most severe high load conditions. Thereby reducing frictional wear and preventing scuffing of liners, pistons and rings.
High Power Outputs
Outstanding thermal and oxidation stability assist the detergent/dispersant additive system in providing excellent control of high temperature deposits in area such as the under crown of the piston and the piston ring belt area, enabling piston rings to function effectively.

Application

Cylinder lubrication of all marine crosshead-type diesel engines operating in both marine and stationary service, and burning heavy residual type fuel oils. Particularly recommended where fuel sulfur content is higher than 3%.
Engine operating at high specific outputs and high thermal loads where manufacturers consider a high level of alkalinity will provide the necessary protection and the use of an SAE 40 is specified.

Key Properties

SAE Grade	40	Test Method
Base No. mg KOH/g	50	ASTM D-2896
Sulfated Ash m%	6	ASTM D-874
Viscosity@40°C mm²/s	155.5	ASTM D-445
Viscosity@100°C mm²/s	15.4	ASTM D-445
Viscosity Index	100	ASTM D-2270
Pour Point°C	-12	ASTM D-97
Flash Point°C	250	ASTM D-92

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CORAL 4040 (TBN-40 Marine Oil)

Cnergyico Coral 4040 marine engine oil is high alkaline reserve trunk piston engine oil (TPEO) designed for use in high specific output medium-speed trunk piston engines burning high sulfur residual fuels (over 2.5% sulfur) under severe conditions in marine or stationary service. It provides extra alkalinity to effectively neutralize acidic products of combustion when on heavy residual fuels and crude oil. It also provide high level of detergency to keep pistons and piston rings free of deposits.

Performace Standard: API CF

Benefits

Prolongs Oil Change-Out Periods
The high Base Number (BN) and superior alkalinity retention characteristics maintain sufficiently high BN under all service conditions to ensure corrosive acids formed by the combustion of fuel sulfur are effectively neutralized, thereby minimizing liner wear.
Reduces Maintenance Costs
The detergent/dispersant additive system provides exceptional engine cleanliness by controlling “black sludge”, that can adversely affect both operation and maintenance in newer design engines.
High Power Outputs
Outstanding thermal and oxidation stability assist the detergent/dispersant additive system in providing excellent control of high temperature deposits in areas such as the under crown of the piston and the piston ring belt area, enabling piston rings to function effectively.
Efficient Purifying System Performance
The additive system effectively controls insoluble. Excellent water separation characteristics enable water to be centrifuged out with essentially no loss of additive.

Application

Medium-speed trunk piston engines including latest designs in stationary power generation.
Medium-speed trunk piston engines (marine service).
Cylinder lubrication in certain trunk piston engines (with separate lubricators which supplement splash lubrication from the crank case).

Key Properties

SAE Grade	40	Test Method
Base No. mg KOH/g	40	ASTM D-2896
Sulfated Ash m%	5	ASTM D-874
Viscosity@40°C mm²/s	152	ASTM D-445
Viscosity@100°C mm²/s	15.16	ASTM D-445
Viscosity Index	100	ASTM D-2270
Flash Point COC°C	250	ASTM D-97
Pour Point°C	– 12	ASTM D-92

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CORAL 3030 (TBN-30 Marine Oil)

Coral 3030 is a moderately high alkaline reserve trunk piston engine oil (TPEO) designed for use in high specific output medium-speed trunk piston engines burning high sulfur residual fuels (over 2.5% sulfur) under severe conditions in marine or stationary service.

Performace Standard: API CF

Benefits

Reduces Maintenance Costs
The detergent/dispersant additive system provides exceptional engine cleanliness by controlling “black sludge”, that can adversely affect both operation and maintenance in newer design engines.
High Power Outputs
Outstanding thermal and oxidation stability assist the detergent/dispersant additive system in providing excellent control of high temperature deposits in area such as the under crown of the piston and the piston ring belt area, enabling piston rings to function effectively.
Prolongs Oil Change-Out Periods
The high Base Number (BN) and superior alkalinity retention characteristics maintain sufficiently high BN under all service conditions to ensure corrosive acids formed by the combustion of fuel sulfur are effectively neutralized, thereby minimizing liner wear..
Efficient Purifying System Performance
The detergent/dispersant additive system effectively controls insoluble. Excellent water separation characteristics enable water to be centrifuged out with essentially no loss of additive.

Application

Medium-speed trunk piston engines including latest designs in stationary power generation.
Medium-speed trunk piston engines (marine service).
Cylinder lubrication in certain trunk piston engines (with separate lubricators which supplement splash lubrication from the crank case).

Key Properties

SAE Grade	30	Test Method
Base No.	30	ASTM D-2896
D2896 mg KOH/g	30	ASTM D-2896
D4739 mg KOH/g	152	ASTM D-445
Viscosity@100°C mm²/s	29	ASTM D-4739
Sulfated Ash m%	3.8	ASTM D-874
Viscosity	–	–
mm²/s@40°C	107	ASTM D-445
mm²/s@100°C	11.9	ASTM D-445
Viscosity Index	99	ASTM D-2270

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

CORAL 3012/4012 (TBN 12 Marine Oil)

Cnergyico Coral (3012/4012) is a premium quality multi-functional diesel engine oil that is specially designed for use in high specific output medium-speed trunk piston engines burning high sulfur residual fuels (over 1% sulfur) under severe conditions in marine or stationary service.

Performace Standard: API CF

Benefits

Reduces Maintenance Costs
The dThe detergent/dispersant additive system provides exceptional engine cleanliness by controlling “black sludge”, that can adversely affect both operation and maintenance in newer design engines.
High Power Outputs
Outstanding thermal and oxidation stability assist the detergent/dispersant additive system in providing excellent control of high temperature deposits in area such as the under crown of the piston and the piston ring belt area, enabling piston rings to function effectively.
Prolongs Oil Change-Out Periods
The high Base Number and superior alkalinity retention characteristics maintain sufficiently high TBN under all service conditions to ensure corrosive acids formed by the combustion of fuel sulfur are effectively neutralized, thereby minimizing liner wear.
Efficient Purifying System Performance
The detergent/dispersant additive system effectively controls insoluble. Excellent water separation characteristics enable water to be centrifuged out with essentially no loss of additive.

Application

Medium-speed trunk piston engines including latest designs in stationary power generation.
Medium-speed trunk piston engines (marine service).
Cylinder lubrication in certain trunk piston engines (with separate lubricators that supplement splash lubrication from the crank case).

Key Properties

SAE Grade	30	40	Test Method
Base No D2896 mg KOH/g	12	12	ASTM D-2896
Sulphated Ash% wt	1.35	1.35	ASTM D-874
Viscosity @40°C mm²/s	110	159	ASTM D-445
Viscosity @100°C mm²/s°C	11.9	15.3	ASTM D-445
Viscosity Index	96	97	ASTM D-2270
Pour Point°C	– 18	– 18	ASTM D-97
Flash Point°C	200	225	ASTM D-92

Note: The typical characteristics are given as a guide only and may vary according to latest production according to ISO.

+92 345 7774418

+92 345 7800375

Info@tle.com.pk

Industrial Lubricants

Lubricants

ORA (Anti Wear Hydraulic Oil)

Benefits

Additional benefits associated with ORA range are as below:

Application

Key Properties

OGER EP (Industrial Gear Oil)

Benefits

Application

Key Properties

OGER EP (Sugar Mill Oil 3800)

Benefits

Application

Key Properties

OTX (Industrial Heat Transfer Oil)

Oil Life

Benefits

Application

Key Properties

CIRKEL (Industrial Circulating Oil)

Benefits

Application

Key Properties

CISPIN (Industrial Spindle Oil)

Compatibility

Benefits

Application

Key Properties

ODE GL-4 (Extreme Pressure Automotive Gear Oil)

Benefits

Application

Key Properties

ODE GL-5 (Automotive Hypoid Differential Oil)

Benefits

Application

Key Properties

SOCOL (Soluble Cutting Oil)

Benefits

Features

Application

Key Properties

CENSURA-T (Turbine Oil)

Benefits

Application

Key Properties

COMPRESS-S (Screw Type Compressor Oil)

Performance Standard

Benefits

Application

Key Properties

COMPRESS-P (Piston Type Compressor Oil)

Performance Standard

Benefits

Application

Key Properties

MP GREASE (Lithium-based Industrial Grease)

Lithium-based Industrial MP Grease

Benefits

Operating Temperature Range

Application

Key Properties

EP GREASE (Lithium-based Industrial Grease)

Benefits

Operating Temperature Range

Application

Key Properties

Gas Engine Oil

OCTIVE-XL 40 (Gas Engine Oil)

Meets standard equipment requirement

Benefits

Application

Key Properties

OCTIVE-LA 40 (Gas Engine Oil)

Meets standard equipment requirement

Benefits

Application